Antistatic Test Meters and Equipments

Product Details:

The Grounding PALM PLATE is a convenient and quick solution to ensuring that there is no charge on the Human Body before entering any ESD safe area. It has a conductive Stainless Steel electrode plate mounted onto an acrylic backing.
The plate can be mounted on the wall at a convenient height and the personnel have to just touch the plate to drain any charge from the body.
The Plate is supplied with a Grounding cord which needs to be connected to any ESD earth point. A 2.2 megohm resistor is provided in the ground cord as precaution against risk of shock.

Specifications
Material : Stainless steel on Acrylic backing
Finish : Brushed effect
Dimensions: Touch Plate 150 x 150 mm
Weight : 500 gms
Decay Time : < 2 secs
Resistance to Ground: 2.2Mohm

Additional Information:

• Packaging Details: Standard

Product Details:

This is an ultra wide-range, battery operated, portable instrument for measuring Surface Resistivity of virtually any flat surface. In the circuit industry, products such as packaging materials, component storage bags and trays, work bench surfaces, table and floor mats, conveyor belts, etc., have resistance values which need to conform to stringent specifications. Moreover, these values are expected to fall within specified limits. The Surface Resistivity meter can play a vital role in monitoring and checking the resistivity characteristic of the above items.
It also has unique additional feature of surface-to-ground measurement capability wherein the resistivity differential between any surface and any chosen ground can be determined.
The surface resistivity is conveniently indicated by a row of LEDs covering a total of 10 decades from 10^3 to 10^13 ohms/square.

SPECIFICATIONS :
Measurement Range : 10^3 to 10^13 ohms/sq
Measurement accuracy : half decade
Resolution : One decade.
Excitation voltage : 9 V
Indication : Visual by LEDs
Test actuation : Press to ON Switch.
Power supply : 9 Volt DC battery.
Low battery : Warning at 7.5 V
Dimensions in mm : 125 x 75 x 29
Weight : 150 GMS
Calibration : Recommended every 12 months
Traceability : To national standards
Warranty : 12 months.
Accessories included : 1 m Grounding Cord Carrying case

Product Details:

This is an ultra wide-range, battery operated, portable instrument for measuring Surface Resistivity of virtually any flat surface. In the circuit industry, products such as packaging materials, component storage bags and trays, work bench surfaces, table and floor mats, conveyor belts, etc., have resistance values which need to conform to stringent specifications. Moreover, these values are expected to fall within specified limits. The Surface Resistivity meter can play a vital role in monitoring and checking the resistivity characteristic of the above items.

It also has unique additional feature of surface-to-ground measurement capability wherein the resistivity differential between any surface and any chosen ground can be determined.

The surface resistivity is conveniently indicated by a row of LEDs covering a total of 10 decades from 10^3 to 10^13 ohms/square.

SPECIFICATIONS :
Measurement Range : 10^3 to 10^13 ohms/sq
Measurement accuracy : half decade
Resolution : One decade.
Excitation voltage : 9 V
Indication : Visual by LEDs
Test actuation : Press to ON Switch.
Power supply : 9 Volt DC battery.
Low battery : Warning at 7.5 V
Dimensions in mm : 125 x 75 x 29
Weight : 150 GMS
Calibration : Recommended every 12 months
Traceability : To national standards
Warranty : 12 months.
Accessories included : 1 m Grounding Cord Carrying case

Product Details:

The Model Z107 has independant circuitry designed to continuously monitor the connections to earth of the Wrist Strap and Work Surface.
WRIST STRAP
This section continuously monitors the wriststrap to detect loss of continuity between operator and monitor. Conditions such as broken coil cords and improper contact with the skin are detected instantly to alert the operator before serious and expensive ESD damage can occur. As there is no resistive return path from the wriststrap, it uses the 'Capacitive AC principle' to check if the operator is adequately grounded. The Wrist Strap section is automatically activated when it is plugged in. Continuous monitoring reduces the need for periodic checks and audits and also ensures greater security.
WORK SURFACE (MAT)
The work surface is monitored by a DC Resistive loop and a warning is given in case the Surface-to-Ground resistance exceeds the safe threshold value of 10 megohms

SPECIFICATIONS
Pass Threshold : under 10 Megohms for Wrist Strap.
: under 10 Megohms for MAT
Indications : Pass - Green LED
Fail - Flashing Red LED for Wrist Strap
Steady Red LED for MAT Audible Alarm for Fail mode.
Power supply : 6VDC 100ma
Dimensions : 110 x 60 x 32 mm
Weight : 75 gms
Calibration : Recommended every 12 months.
Warranty : One year.

Product Details:

Wrist straps and ESD footwears are the first line of defence against electrostatic charge build up on the human body. They are designed to carry away this charge as soon as it is generated. At the same time the wrist strap/footwear must remain electrically safe for the user. Thus, it is important to test every wrist strap/footwear regularly.
In order to protect sensitive electronic components, the maximum wrist strap resistance should not be more than 10 meg ohms and Footwear resistance should not be more than 35 Mega ohms. On the other hand, the resistance should not be less than 0.75 Mohm as protection to the wearer from dangerous levels of voltage and current flow.
This COMBO TESTER is a combination Wriststrap DUAL footwear tester which checks these parameters under actual realtime operating conditions. The footwear section gives a warning if either of the Footwear is defective.

SPECIFICATIONS
Pass Range : Wrist strap 0.75 to 10.0 meg ohm
Footwear 0.75 to 35.0 meg ohm
Actuation : By gently pressing respective buttons
Accuracy : + 10%
Power requirement : 9 V DC battery.
Low Battery : Orange - Warning less than 7 volts.
Dimensions Wt : (instrument) 125 x 75 x 29 mm 150 gms
(stand) 400 x 400 x 950 mm ht. 5 Kgs
Calibration : Recommended every 12 months.
Traceability : To national standards
Warranty : 12 months.

Product Details:

The generation and accumulation of unwanted electrostatic charges, both surface and airborne, poses a serious problem in various industries and laboratories. For instance, static charges can create havoc with sensitive equipment and electronic components.
This Bench Top instrument is designed to neutralise your ESD work-station or ESD protected area with a stream of ionized air. It does what Wrist straps and Conductive mats cannot do - i.e. remove static charges from non-conductive objects and surfaces.
It is able to rapidly neutralise potentially dangerous charges in a localised area. An axial fan gives the desired air flow to neutralise static on specific objects rapidly, as well as control static in the general area in front of the ionizer.
This is a powerful, trouble free and compact solution to static control problems anywhere. The unique high efficiency ionization pulse circuitry provides fast discharge with minimum air flow. A high air flow would lead to operator discomfort and may also disturb small components.
This static eliminator works on the principle of high voltage corona discharge to produce the neutralising ions. It is designed for continuous use and a current limitor circuit ensures operator safety even if the ion emitters are accidentally touched.
The Z207 has special circuitry to ensure a balanced ion output. This ensures that no net charge is induced by the ion shower. Balance is maintained irrespective of supply voltage and even if the discharge electrodes are dirty. Balanced output is essential when used in ESD protected areas.
APPLICATION AREAS
Anti-static work stations and assembly units.
Plastic film and paper industries
Plastic manufacturing and moulding units.
Pharmaceutical industry.
Clean rooms.

SPECIFICATIONS
Air Flow : 1.8 cu m/min
Noise level : 45 dbA (at 1m)
Supply : 230V AC 50Hz 20 Watts
Ionization voltage : 6-8 KV
Ion balance : under -/+ 50 V
Construction : Powder coated MS cabinet
Dimensions in mm : 170 x 90 x 200
Weight : 2.75 kgs
Warranty : One year